Inovativ AXIS Base Station

Set up your mobile workstation to smoothly move your monitor and gear around the set with the AXIS Base Station from Inovativ. The DigiStation is comprised of various easily assembled components such as the AXIS Stand, 8" heavy-duty locking wheels, the WorkSurface Pro, a hanger with a 25 lb weight bag, the Pro Monitor Mount, two Mafer clamps, and the AXIS Trough.

The AXIS Stand extends to approximately 79" in height, and a VESA-compatible monitor can be mounted on top using the Pro Monitor Mount and can be raised as high as 90". The WorkSurface Pro attaches mid-stand to allow you to secure a computer, case, or other gear, and the AXIS Trough mounts below it to store additional accessories. The hanger and weight bag provide counterweight and safety for heavier loads.

Inovativ AXIS Stand

Mount AXIS vDrop workstation accessories and other grip equipment onto the AXIS Stand from Inovativ. This anodized aluminum grip stand features three sections that extend to a maximum 79" tall, and it collapses down to 50.5" when folded. Its dual-reinforced legs provide a solid base to keep from tipping.

The three-section stand is compatible with the separately available heavy-duty 8" caster wheel system that will allow you to transport the stand smoothly across the floor, features foot brakes, and has a footprint of 37.7 x 46.4". Each stand section is secured with a locking knob and the top section features a Junior pin.

Inovativ AXIS 8" Wheel Set with Brakes

Keep your AXIS Grip stand rolling smooth even over rough ground or electrical cords with the AXIS 8" Wheel Set from Inovativ. The wheel set includes three heavy-duty swivel wheels with footbrakes that mount onto 1" square AXIS grip stand legs.

The wheels are constructed with a durable aluminum and each wheel weighs approximately 6.5 lb. When attached to stand legs, the wheels create a footprint of 37.8 x 46.4". Each wheel is secured to the stand leg with a locking lever, and footbrakes allow you to secure the stand in-place. Each wheel can be stored in its own included nylon bag, and all the hardware required for attaching the wheels to the stand is included.

Compatibility

AXIS Stand

Inovativ grip stands

Inovativ AXIS Weight Hanger with 25 lb Weight Bag

Use this AXIS Weight Hanger with 25 lb Weight Bag from Inovativ to keep your AXIS grip stand stable. The hanger mounts onto the 1" leg of your AXIS or American grip stand and secures with a locking lever. It provides a place to hang the included 25 lb AXIS weight bag or other type of weighted bag for stability.

Compatibility

AXIS Stand or American Grip style stands with 1" square legs

Inovativ WorkSurface Pro

Add a workstation platform to your AXIS Stand or grip stand with this WorkSurface Pro Platform from Inovativ. The platform attaches to any stand or workstation with a 2" diameter using its Inovativ vDrop mount. It features two handles on the sides to raise, lower, or rotate the platform.

The platform can rotate around the stand 360°, and it can be raised to a maximum height of 43" and lowered to a minimum height of 34" while mounted on the stand. The top surface of the WorkSurface Pro is lined with a soft carpet to prevent any scuffing of your gear. It also features a cable management hole to pass cables from your equipment through, such as a keyboard or mouse.

Two mafer clamps are included to mount the platform onto other surfaces and to secure additional accessories. The WorkSurface Pro platform is compatible with the separately available Top Drawer with a three-digit combination lock to secure your gear inside.

Inovativ Pro Monitor Mount

The INOVATIV Pro Monitor Mount mounts on industry standard 5/8" (Baby) pins and supports monitors with a 100 x 100 VESA mounting pattern. The sturdy mount is made from 6061 aluminum and stainless steel components and is anodized black and orange. The design of the mount allows you to freely rotate the monitor and lock it in either horizontal or vertical orientation. The mount also features a lockable-tilt axis.

This compact monitor mount supports monitors with a 100 x 100mm VESA mounting pattern. It mounts on a standard 5/8" (baby) pin commonly found on C-stands.

It features a 3/8"-16 threaded accessory mounting hole at the top of the mount that allows you to add optional accessories such as a baby pin adapter or articulating arm.

The tilt mechanism features an internal rosette design that helps the mount hold the tilt position that you set.

Inovativ AXIS Trough

Compatible with the AXIS Stand, this powder-coated black AXIS Trough from Inovativ offers convenient storage for tools, adapters, batteries, and accessories. It quickly installs between the legs of your AXIS Stand and is secured with locking knobs.

The Trough features durable aluminum construction with a powder-coated finish, and it includes a soft carpet lining to prevent noise and scratching of your gear.

Compatibility

AXIS Stand

In the Box

---------------------------------------------------

• Inovativ AXIS Stand
• Limited 5-Year Manufacturer Warranty
• Inovativ AXIS 8" Wheel Set with Brakes
• Mounting Hardware
• 3 x Wheel Bags
• Limited 5-Year Manufacturer Warranty (Wheelbase)
• Limited 30-Day Manufacturer Warranty (Tires)
• Inovativ AXIS Weight Hanger with 25 lb Weight Bag
• Inovativ AXIS Weight Bag (25 lb)
• Limited 5-Year Manufacturer Warranty
• Inovativ WorkSurface Pro
• 2 x Inovativ AXIS Mafer Clamp
• Limited 5-Year Manufacturer Warranty
• Inovativ Pro Monitor Mount
• Limited 5-Year Manufacturer Warranty
• Inovativ AXIS Trough
• 4 x Locking Knob
• Limited 5-Year Manufacturer Warrant